Decent price, kept me updated with progress, well packed (and they chucked in some sweeties!) and good delivery. Great service overall.Read on Google
The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the well-known, previous Eiszapfen. When developing the fittings, Alphacool focused specifically on a specific problem: the deformation of PETG HardTubes at high temperatures. These can deform at 60 ° C. Although such a temperature is rarely reached, it can still occur. The Eiszapfen PRO prevent this problem from the start and keep the tubes in position.
Deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which ensures a better hold. Through the use and the compression seal in the screw connection, the tube is reinforced from the inside and outside.
The HardTube does not slip even under higher loads. Alphacool has tested the tensile strength of up to over 8kg! So you don't need to worry about this.
Technical specifications
- Material: Brass
- Colour: White
- Height: 23 mm
- Diameter: 26 mm
- Thread length: 5 mm
- Thread: G1 / 4 "
- Hard Tube size: 16 mm
- Compatibility: PETG, acrylic, brass and glass pipes
- Weight: 42g
Materials | |
Materials | Brass |
Colour | |
Primary Colour | White |
Colour Finish | Matt |
Dimensions | |
Length | 23 mm |
Width | 26 mm |
Height | 23 mm |
Weight | 42 g |
Outer diameter | 26 mm |
Lighting | |
Lighting | No |
Set | |
Set | Yes |
Number of products in set | 6 |
Water Cooling | |
Water cooling purpose | Tube connection |
Water cooling connection type | screw connection |
Water cooling connectors | G1/4" outer thread, Hard tube connector 16 mm |
Suitable for hardtubes | Yes |
Angle | |
Is angled | No |
Rotatable | No |
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.