AXAGON ADSA-D25 SATA 2.5 CLONE DUAL SSD Dock Station - USB 3.2 Gen 1

SuperSpeed USB 5 Gbps docking cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B <-> USB-A cable enables a connection to computer.

This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy.

You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux).

SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSDHDD condition. Supports sleeping of the connected disks and station.

The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface.

Input
&bull USB 3.2 Gen 1 (USB 3.1 Gen 1 USB 3.0) SuperSpeed USB 5 Gbps.
&bull Speed up to 5 Gbits. 
&bull Connection via USB Micro-B female connector.

Device support
&bull SATA III - 6 Gbs (600 MBs) interface.
&bull Supports 2.5" SSDHDD.
&bull Max. disk capacity &ndash all without limitation.
&bull Max. 2.5" disk height- all without limitation.

Other features
&bull Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 USB 3.0), backward compatible with USB 2.0.
&bull Supports transmission rates 5000 480 Mbits (SuperSpeed HighSpeed).
&bull Compliant with Serial ATA 3.0 specification (SATA600), transmission rates of up to 6 Gbs (600 MBs).
&bull Compliant with Serial ATA 2.0 specification (SATA300), transmission rates of up to 3 Gbs (300 MBs).
&bull Compliant with Serial ATA 1.0 specification (SATA150), transmission rates of up to 1.5 Gbs (150 MBs).
&bull Compliant with USB Mass Storage Class Specification.
&bull The total bandwidth transmission rate of the station is determined by the USB interface used (theor. 5 Gbits).
&bull Supports BOT (Bulk-Only Transport).
&bull Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.
&bull Supports TRIM functionality to limit gradual degradation of the SSD performance over time.
&bull Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition.
&bull SSDHDD boot support in docking station.
&bull Possibility to connect your device while running thanks to the Hot Plug support.
&bull Full Plug and Play support.
&bull HDD Auto Spindown - automatic spinning down when idle.
&bull HDD Turn Off - turns off the drive after removing the device or spinning down the PC.
&bull Connection via USB Micro-B female connector.   
&bull USB Micro-B <-> USB-A cable 60 cm long is included.
&bull LED indicating SSDHDD dock power and disk activity in both shafts.
&bull Station dimensions 89 x 58 x 59 mm.
&bull Weight 137 g.

Power
&bull Power cable USB-A <-> 3.51.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V min. 1A, e.g. AXAGON ACU-DS16.
&bull Power switch.

Disk cloning feature
&bull Cloning takes place without connecting the station to a computer.
&bull The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started.
&bull Both HDD and SSD can be cloned.
&bull Cloning speed up to 300 MBs.
&bull The total disk cloning time depends on the capacity of the source disk, not the amount of disk data.

Supported operating systems
&bull MS Windows 7 8 10 11 and later, Windows Server 2008 2012 2016 2019 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.
&bull Note Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains
&bull SSDHDD dock,
&bull USB Micro-B <-> USB-A cable 60 cm long,
&bull power cable 100 cm,
&bull printed installation manual CZ DE DK ENG ESP FIN FR GR HR HU IT NL PL PT RO RU SK SWE TR BG CN ARA,
&bull packed in a cardboard box.