Help & Support Blog Forum
 - EK Water Blocks EK-Quantum Kinetic FLT 360 DDC PWM D-RGB Pump / Reservoir Combo - Plexi
ek-water-blocks

EK Water Blocks EK-Quantum Kinetic FLT 360 DDC PWM D-RGB Pump / Reservoir Combo - Plexi

star_border star_border star_border star_border star_border
No review for this product yet.
EK's new flat Pump / Reservoir Combos suitable for 120mm fan mounting, DDC Pump Included
£229.99 (incl. VAT)
Something went wrong. We are currently working on the problem!
fiber_manual_record Out of stock
SKU WC-9W3-EK
EAN 3831109819777
MPN 3831109819777
MANUFACTURER EK Water Blocks

Kinetic series pump-reservoir combos are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!

All new Flat (FLT) series EK-Quantum Kinetic FLT DDC pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.

EK-Quantum Kinetic FLT DDC series pump-reservoir units are equipped with genuine DDC 3.25 pumps, made in Europe, which are capable of delivering flow rates of 1000 liters per hour with a maximum head pressure up to 5.2 meters! These new FLT series combo units are available in three different sizes of 120mm, 240mm, and 360mm.

The new flat-shaped pump-reservoir units are to revolutionize the way you were thinking about combo units and loop building. Since 120mm fan mounting patterns are the most dominant mounting options inside PC cases these days, these new Kinetic FLT DDC combo units will allow greater flexibility for installation since they don't require drilling of new mounting holes on your case.

The combo unit is equipped with a total of six industry-standard G1/4" ports, which can be, based on the orientation of the unit, used as inlet and outlet ports, as well as fill and drain ports.

The reservoir is manufactured of premium quality acrylic material, machined to perfection, while the sealing is performed by a quality EPDM o-ring. Alongside the reservoir is a black anodized aluminum cover under which the Addressable D-RGB LED strip is placed. Proper LED implementation is one of the main focus points of EK so that there are as few visible "LED hotspots" as possible.

These combos are paired with powerful yet compact 3.2 PWM DDC pumps but are compatible with D5 style pumps as well.

Technical specifications:
- Size (HxWxT): 365x120x58mm (with mounting system)
- Capacity: ~435ml
- D-RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground)

Pump electrical and mechanical properties:
- Motor: Electronically commuted ball bearing motor
- Rated voltage: 12 V DC
- Power consumption: 18 W
- Maximum head pressure: up to 5.2m
- Maximum flow rate: up to 1000 L/h
- Maximum liquid temperature: 60 °C
- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
- Power connector: Sata Connector- and 4-Pin PWM FAN connector

Operational regime:
- PWM duty cycle: ~ 20-100%
- Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present

Enclosed:
- EK-Quantum Kinetic FLT 360 PWM D-RGB
- Mounting mechanism with all necessary screws for 120mm fan mounting
- Pair of EK reservoir holders with mounting screws
- 4 × G1/4 Plugs
- 1 × Allen key for reservoir holders

Please note:
- Do not clean the reservoir with alcohol derivates or other solvents as the acrylic may crack!
- Coolant and additional plugs are just for showcase and are not delivered with the product!
- The DDC pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry.

Materials
Materials PPS-GF40, Stainless steel
Colour
Primary Colour Transparent
Secondary Colour Black
Pump Specifications
Max. Pressure Head 5.2 m
Max. Water Flow 1000 l/h
Type
Pump type DDC
Lighting
Lighting Yes
Lighting Colour RGB
Lighting Compatibility ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync
Dimensions
Length / Depth 58 mm
Width 120 mm
Height 365 mm
Volume 435 ml
Water Cooling
Water cooling component Pump + Reservoir
Water cooling connectors 6x G1/4"
Thermal Specifications
Max. System Temperature 60 °C
Power Specifications
Power consumption 18 W
Rated voltage 12 V
Internal Ports
Pump connectors 4 Pin (PWM control), SATA (power)
RGB / LED connectors 1x Digital RGB (3-Pin 5VDG)
Add a Review
No review for this product yet.

UK Delivery
Order by 5pm (Monday to Friday) or 3pm (Saturday) for Next Day Delivery*
*Exclusions and product restrictions apply
Full Delivery Information

International Delivery
Delivery to over 40 countries
Full Delivery Information

Returns
30 Day return and refund period
Full Returns Information

Christmas Delivery
We recommended ordering by Friday 20th December to avoid disappointment, however we will ship Monday 23rd December.
Christmas Delivery Information

Extended Christmas Returns
All orders placed between Friday 1st November and Friday 20th December qualify for extended Christmas returns. Terms & conditions apply.
Extended Christmas Returns Information

4.8

star star star star star_half

Google customer reviews

Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.

What our customers say about us

25 years trust badge