Decent price, kept me updated with progress, well packed (and they chucked in some sweeties!) and good delivery. Great service overall.Read on Google
Order within
Put unparalleled performance in the palm of your hand, with the Endgame Gear OP1 Gaming Mouse. Shaped for the claw grip and optimised for esports, this wired gaming mouse provides uninterrupted power delivery and data connection to ensure peak operation at all times. What’s more, this mouse pairs a Pixart PAW3395 optical sensor and STM ARM Cortex-M4 MCU together for pixel precise gaming with less than 1ms latency. The power is in your hand.
The Endgame Gear OP1 Gaming Mouse is an ultra-light wired mouse, weighing in at only 50g. The shell has been shaped for the claw grip and is even compatible with larger hands. Drawing inspiration from the XM shape, this mouse has flatter sides to enhance flexibility for finger placement, but they are also extended to prevent any mis-clicks. These subtle changes offer additional comfort and control.
The Endgame Gear OP1 Gaming Mouse is available in three models. This is the standard OP1 with a 1000Hz default polling rate, in white.
Every component in the Endgame Gear OP1 has been optimised for pixel precision and ultra-fast gaming. The Pixart PAW3395 optical sensor has up to 26,000 CPI, 650 IPS tracking, and 50G acceleration for incredible performance and that competitive edge. Additionally, this sensor features Motion-Sync technology, to provide consistent data intervals for even smoother gameplay.
To enable low latency, the Endgame Gear OP1 is equipped with patented analog technology and a built-in STM32 ARM Cortex-M4 microcontroller. This MCU keeps internal signal processing latency below one millisecond. As a result, you can enjoy extremely low click latency. By default, the polling rate is set to 1000Hz, but can alternatively be adjusted to 125Hz or 500Hz.
The Endgame Gear OP1 Gaming Mouse utilises Kailh GX mechanical switches for the main left and right click. These have a short, well defined click with tactile feedback, for that crisp clicking action. What’s more, they are rated for 80 million actuations, for enhanced longevity and durability. Their precise actuation point and well-balanced design mean these are great switches for spam clickers and fast-paced gaming.
Should these switches not vibe with your gameplay style, they can easily be replaced with any one of the available OP1 Switch Packs. The screws to open up the mouse shell are easy to access, and each switch in these packs is pre-installed on a PCB for seamless installation. (The Universal Switch pack does not come pre-mounted.)
The middle mouse and side buttons are equipped with pre-sorted Kailh GM 2.0 switches, each rated for 20 million actuations. What’s more, the two-way scroll wheel has a TTC silver wheel encoder.
A new standard amongst Endgame Gear mice, the OP1 features the Hybrid Skate Design. This enables the underside of the mouse to be compatible with both small and large skate sets. As such, you can equip this gaming mouse with the glides that best suit your playstyle and mouse mat material. The small skate set comes installed by default, which consists of two medium and two small dot glides. This set is better for hard material gaming surfaces, but also offers a great balance between surface area, weight, and glide properties. Included within the scope of delivery is a secondary large skate set, well suited for softer mousepads.
The Endgame Gear OP1 connects to your gaming PC USB-A. To reduce drag and offer incredible flexibility, this gaming mouse utilises the Endgame Gear Flex Cord 5.0 Cable, braided for a clean finish. This cable also provides consistent power delivery and data connection, keeping this mouse at peak performance throughout your gaming sessions.
| Mouse Specifications | |
| Skates | Hybrid Skate Design |
| Microcontroller | ST ARM Cortex M4 |
| Standards / Specifications | |
| Polling Rate | 1000 Hz, 500 Hz, 125 Hz |
| Colour | |
| Primary Colour | White |
| Ergonomics | |
| Mouse layout | right-handed |
| Supported Grip Types | Claw Grip |
| Sensor | |
| Sensor Type | optical |
| Sensor Model | Pixart PAW 3395 |
| DPI adjustable | Yes |
| Min. DPI | 50 DPI |
| Max. DPI | 26000 DPI |
| Lift Off Distance (LoT) | 1 mm |
| Acceleration | 50 G |
| Max. Tracking Speed | 650 IPS |
| Dimensions | |
| Length / Depth | 118.2 mm |
| Width | 60.5 mm |
| Height | 37.2 mm |
| Weight | 50.5 g |
| Compliance | |
| Compliance Documents | Endgame Gear OP1 Compliance and Safety |
| Manufacturer Information |
Pro Gamersware GmbH Gaußstraße 1, 10589 Berlin, Germany [email protected] |
| Responsible Person |
Pro Gamersware GmbH Gaußstraße 1, 10589 Berlin, Germany [email protected] |
| Product Series | |
| Product Series/Family | OP1 |
| Connectivity | |
| Wired / Wireless | Wired |
| Connection Type | USB Typ A |
| Cable | Black Flex Cord 5.0 |
| Cable Length | 180 cm |
| Materials | |
| Materials Chassis | Plastic |
| Materials Surface | Dry Grip Coating |
| Materials Skates | PTFE |
| Keys | |
| Number of Buttons / Keys | 6 |
| Primary Mouse Button Switches (right / left) | pre-sorted Kailh GX switches |
| Switch lifetime | 80 million actuations |
| Click Detection | Analogue |
| Wheel Encoder | TTC silver (wide) |
| Mouse Wheel Scrolling | 2-way |
| Middle Mouse Button Switch | Kailh GM 2.0 switches, pre-sorted (20 million actuations) |
| Side Button Switchtes | Kailh GM 2.0 switches, pre-sorted (20 million actuations) |
Keep me up to date with the latest news, product launches and promotions
* Required field
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.
