This product is no longer available.
Light up your build
The Liquid Freezer II A-RGB combines the efficient, award-winning PWM pump of the Liquid Freezer II with new A-RGB fans optimised for static pressure. This gives you a whole new aesthetic with extremely low noise and equally low temperatures.
Efficient, in-house developed pump
Unlike many of our competitors, we went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.8 W at no load, 2.3 W under normal load and a maximum of 4.8 W under full load for the entire AiO.
Premium class radiator
Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.
Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 C lower temperature increase in the temporary turbo mode of modern CPUs.
Smooth CRM fan
Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100% convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, our customer service team will send you a replacement free of charge and easily, without a need to replace the entire unit.
The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15 C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.
High quality hoses with integrated cable management
The fibre-reinforced, long EPDM tubing of the Liquid Freezer II allows installation even in large cases and effectively prevents the coolant from evaporating, so you don't have to worry about refilling the compact water cooling system.
In addition, it hides both the A-RGB and PWM cables of your radiator fans thanks to a well thought-out cable management system. This way, you only have to connect two plugs to the mainboard and save valuable time during installation. In the end, you don't need to hide any more cables and your view is reduced to the essentials.
Fan optimized on static pressure
The illuminated P-fans are already mounted on the compact water cooling system ex works with the following advantages:
- High static pressure for improved cooling performance |1.85 mm H2O
- Extended speed range | 200 - 2000 rpm (1800 rpm on the radiator)
- Low power consumption | 0.11A (0.2A RGB)
- Less vibration and rubber bumpers | reduced by > 95%
- Improved lifetime | 6 years warranty
- High quality plain bearing
- PWM for synchronous pump/fan control
- RGB sharing for synchronous lighting
The right configuration for everyone
Thanks to its long hoses, availability in 5 different sizes and different lignting options the Liquid Freezer II Series is versatile. It is highly compatible and can be used effectively, from small form factor PCs (be aware of the radiator thickness!) to big towers.
The Liquid Freezer II is the successor to the well-respected Liquid Freezer water cooler from ARCTIC.
Specification:
- Intel Socket: 1700, 1200, 115X, 2011-3*, 2066* *Square ILM
- AMD Socket: AM4
- Ram Clearance: unlimited
- Warranty: 6 Years
- Connector: Cooler: 4 pin PWM Connector
- LEDs: 4-pin 12V-G-R-B Connector with Y-Splitter
Pump/Cold Plate
- VRM Fan: 40 mm, 1000 – 3000 RPM (PWM controlled)
- Pump: 800 – 2000 RPM (PWM controlled)
- Power Consumption: 0,5 W – 2,7 W (Pump + VRM Fan)
- Cold Plate: Copper, Micro-Skived-Fins
- Thermal Paste: MX-5 (0,8 g)
Fan
- Fan: 3x ARCTIC P12 PWM A-RGB – 120 mm Fan
- Fan Speed: 200 – 1 800 RPM
- Fan Bearing: Fluid Dynamic Bearing
- Noise Level: 0.3 Sone
- Voltage / Current: 0.08 A / 12 V DC
- Airflow: 48.8 CFM
- Static Pressure: 1.85 mm H2O
- Connector: 4 pin Connector
RGB
- LEDs: 12 A-RGB LEDs per Fan
- Connector: 3 pin 5 V-DI-Gnd
- Current/Voltage: 0.4 A/ 5 V
Size & Weight
- Radiator: 398 mm x 120 mm x 38 mm
- Pump (w/o tubes): 98 mm x 78 mm x 53 mm
- Tube Diameter: Outer: 12,4 mm // Inner: 6,0 mm
- Tube Length: 450 mm
- 1687 g (3 Fans, Radiator, Pump, Tubes)
| Type | |
| CPU Cooler Type | AiO Liquid Cooler |
| Additional Contents | |
| Included fans | 3x 120 mm |
| Fan Specifications | |
| Fan Size | 120 mm |
| Materials | |
| Materials | Copper |
| Lighting | |
| Lighting | Yes |
| Lighting Colour | RGB |
| Dimensions | |
| Length / Depth | 398 mm |
| Width | 120 mm |
| Height | 38 mm |
| Weight | 1687 g |
| Radiator size | 360 mm |
| Tube length | 450 mm |
| Colour | |
| Primary Colour | Black |
| Fan Main Colour (Frame) | Black |
| Fan Main Colour (Rotor) | Grey |
| CPU | |
| CPU Socket | 1700, 2011-V3, 2066, AM4 |
| Noise | |
| Max. Single Fan Noise Sone | 0.3 Sone |
| Internal Ports | |
| Fan connectors | 4 Pin (PWM) |
Been using this for 5 months now with a 7900x. Handles the heat perfectly, cpu never gets above 65C. While that sounds high it really isn't for 7000 series cpu. The only thing that stops me giving a 5 star is installation was a pain because the manual & website were wrong. The out of the fan direction were different and the mounting kit didn't match the instructions. Was able to piece together fitting instructions and was all good after that
I had high hopes for the Liquid Freezer II which gets lauded online but I wish I'd gotten something else for the peace of mind. My cooler had some kind of incorrect threading on one of mounting brackets which required a large amount of force to screw in (100% sure I was using the correct screws - which both worked fine on the opposite side). I also had one fan which wobbled causing it to constantly scrape against the radiator and had to be loosened to the point of almost falling off. In the end it does work but I can hear a lot liquid tricking when it's running and my 13900K gets to 100c very quickly. It's quiet enough though. I should have gotten EKWB.
Keep me up to date with the latest news, product launches and promotions
* Required field
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.
