The Mini-ITX case from Jonsplus has an elegant design made of aluminium and tempered glass. The compact case is highly compatible with powerful hardware components. The flexible interior makes it suitable for powerful gaming systems and desktop computers alike.
The Features of the Jonsplus i100 Pro Mini-ITX Case at a Glance:
- Versatile Mini-ITX Case
- Elegant design made from aluminium and steel
- Two tinted side panels
- Modular construction with many hardware options
- Up to one 360/280 radiator at the top
- Up to six 120 or four 140 mm fans
- Boxed with riser cable for vertical GPU mounting
- Up to 1x 3.5” and 2x 2.5” drives
The modular Jonsplus i100 Pro in Detail
The i100 Pro from Jonsplus comes with an impressive and elegant brushed aluminium design, two tinted side panels made of Tempered Glass and flawless workmanship. Inside, the Mini-ITX case is highly flexible and can accommodate full-size gaming hardware. By changing the mainboard tray, the rear panel of the case and the positioning of the power supply brackets, three options are available for hardware assembly.
Dual Chamber Design with vertical GPU and AIO Cooler:
The dual chamber design places the CPU and GPU in separate thermal chambers, which benefits the cooling of the components. Also, it showcases the graphics card through the tempered glass side panel. With this setup, an SFX power supply is recommended to allow sufficient airflow between the power supply and the graphics card.
Component compatibility:
- GPU: 345 - 373 x 160 x 62 mm (L x W x H)
- CPU cooler: max. 77 mm height
- Radiator: 360/280/240/120 (max. 55 mm thickness (radiator + fans))
- PSU: ATX/SFX max. 175/150 mm length (with/without bottom fans)
- Fans: 6x 120 / 4x 140 mm
Single Chamber Design with horizontal GPU and CPU Air Cooler:
The single chamber design allows the installation of a large CPU air cooler in combination with a long high-end graphics card and a ATX power supply.
Component compatibility:
- GPU: 345 - 373 x 160 x 62 mm (L x W x H)
- CPU cooler: max. 166 mm height
- PSU: ATX/SFX max. 140 mm length
- Fans: 3x 120 / 2x 140 mm
Single Chamber Design with horizontal GPU and AIO Cooler:
Those who prefer an AIO in the single chamber configuration can install a radiator up to 360 mm in size. Furthermore, there is enough space for long high-end graphics cards. The size of the radiator limits the choice to an SFX PSU with a maximum length of 115 mm.
Component compatibility:
- GPU: 345 - 373 x 160 x 62 mm (L x W x H)
- Radiator: 360/280/240/120 (max. 55 mm thickness (radiator + fans))
- PSU: SFX max. 115 mm length
- Fans: 3x 120 / 2x 140 mm
The case feet are also modular and their length can be adapted to the needs of the system. Higher case feet facilitate the intake of fresh air through the bottom of the case.
All three configurations make use of the natural chimney effect. The generous openings in the lower and top part of the case create a draught of air, which benefits all the installed components. The removable filters in the bottom, top and back panel of the Jonsplus i100 Pro keep the interior clean and free of dust.
Two 2.5” mounts are available for data drives, which, when installed, limit the length of the graphics card to 345 mm. An additional 3.5” hard drive can be installed behind the front panel.
