Order within
One of Kolink’s most popular cases, the Citadel Mesh is now available as a full-sized, ATX case. The Kolink Citadel Mesh ATX PC Case is equipped with support for a wide selection of gaming hardware and cooling components, expertly displayed by the tempered glass side panel. With its mesh front panel and stylish side ventilation, this case has phenomenal natural airflow which is further enhanced by the four, pre-installed Kolink Umbra ARGB/PWM fans. User-friendly features paired with intelligent cable management and interior design ensure this case is perfect for all PC building enthusiasts.
The Citadel Micro-ATX is one of Kolink’s most popular series. Now, the Kolink Citadel Mesh is available as an ATX mid-tower. This full-sized chassis bears many of the aesthetic markers of the range, making it a wonderful addition with its sleek, matte black finish.
Creating phenomenal natural airflow, the front mesh panel has been elevated by side ventilation. Additionally, there are four, pre-installed Kolink Umbra 120mm ARGB/PWM fans across the Kolink Citadel Mesh ATX. Achieve full control of these fans and your gaming PC’s airflow with the included Kolink Umbra Core controller. This allows you to adjust fan speeds as well as the RGB lighting with the press of a button.
What’s more, the Kolink Citadel Mesh ATX is a fantastic showcase of all your high-end gaming hardware. The side panel is manufactured from tempered glass, putting the interior on full display. This panel is held in place by two screws, situated on the rear panel for a sleeker look than their side-mounted counterparts. As a result, you have easy access to your hardware as well as a clean aesthetic.
Across the chassis, there are plenty of mounting options for cooling hardware on the Kolink Citadel Mesh ATX PC Case. Upon the front panel, three of the four pre-installed 120mm fans can be found. Alternatively, these can be swapped for three 140mm fans or a radiator up to 420mm long. The roof has mounts for three fans, either 120mm or 140mm, which could also be utilised for a radiator up to 360mm long. Lastly, the rear panel hosts a singular fan or radiator, at 120mm or 140mm. This is where the final pre-installed Kolink Umbra 120mm fan is mounted.
Thanks to the clever design and spacious interior, the Kolink Citadel Mesh ATX is perfect for custom water-cooling loops, including dual-radiator systems. Plus, with clearance for a CPU cooler up to 180mm tall, the majority of hardware is compatible.
As an ATX form factor case, the Kolink Citadel Mesh ATX can house a wide variety of gaming hardware. Starting with the motherboard, this case can accommodate all common form factors, including E-ATX. To go with this, there are seven horizontal and three vertical expansion slots to accommodate for your PCIe technology. As a result, you can vertically mount your graphics card utilising the Kolink Vertical GPU Kit. However you orientate your graphics card, there is clearance for GPUs up to 380mm long. This more than meets the dimension requirements for majority of GPUs currently available.
Helping to keep the interior tidy, the power supply is held within a dedicated PSU shroud that features the iconic Kolink hexagonal cut-outs, for further ventilation. This area can accommodate for PSUs up to 200mm long, as well as a drive cage that holds two of either 2.5” SSDs or 3.5” HDDs. What’s more, there are additional SSD mounts located on the rear of the motherboard backplate on a removable tray. This holds a two more 2.5” drives, granting you amazing flexibility with your storage solution.
The Kolink Citadel Mesh ATX PC Case’s interior has been carefully designed to maximise on hardware and cooling, as well as providing plenty of cable management options. Thanks to the twelve rubber grommets, four Velcro anchor ties, and two cable routing tubes, you can expertly manage the cables within this build. Plus, the I/O panel has been mounted to the side, further facilitating this notion.
Unlocking extensive connectivity, the I/O panel features one USB 3.2 Gen 2 Type-C, two USB 3.1, a singular USB 2.0, and an HD audio jack. What’s more, next to the power and reset there is an LED button, for easy control of your lighting.
| Brand | Kolink |
| Model | Citadel Mesh ATX PC Case |
| Materials | Tempered glass SPCC 0.7mm steel |
| Side Panel | Tempered glass 2 x rear screws |
| Motherboard Support | E-ATX / ATX / Micro-ATX / Mini-ITX |
| Expansion Slots | 7 + 3 |
| GPU Support | Up to 380mm long Triple-slot Vertical mounting supported with Kolink Vertical GPU Kit |
| PSU Support | ATX form factor Up to 200mm long |
| Pre-Installed Fans | 4 x Kolink Umbra 120mm ARGB/PWM fans 3 x front 1 x rear |
| Full Fan Support | Front: 3 x 120mm or 3 x 140mm fans Roof: 3 x 120mm or 2 x 140mm fans Rear: 1 x 120mm or 140mm fan |
| Radiator Support | Front: 420mm / 360mm / 280mm Roof: 360mm / 280mm / 240mm Rear: 140mm / 120mm |
| CPU Cooler Clearance | Up to 180mm tall |
| Drive Bays | 2 x 2.5” or 3.5” 2 x 2.5” (removable trays) |
| Cable Management | 23mm space 12 x rubber grommets 4 x Velcro cable anchors 2 x cable routing tubes |
| I/O Panel | 1 x USB 3.2 Gen 2 Type-C 2 x USB 3.1 1 x USB 2.0 1 x HD Audio jack 1 x LED button 1 x Power and reset button |
| Dimensions | 231mm x 485mm x 460mm W x H x D |
| Weight | Gross: 9.16kg Net: 7.88kg |
| Drive Bays | |
| 2.5 / 3.5 inch internal drive bay (combined) | 2 |
| 2.5 inch internal drive bay | 2 |
| Colour | |
| Primary Colour | Black |
| Fan Main Colour (Frame) | Black |
| Fan Main Colour (Rotor) | White |
| Power Supply | |
| PSU included | No |
| PSU Format | ATX |
| Power Supply Position | rear bottom |
| Additional Contents | |
| Included fans | 4x 120 mm |
| Materials | |
| Materials | Tempered Glass, SPCC (steel) |
| Expansion Slots | |
| Expansion slots / PCI slots | 10 |
| PCI slot allocation | 7 + 3 |
| Case | |
| Case Type | Mid Tower |
| Lighting | |
| Lighting | Yes |
| Fan / RGB control | Yes |
| Lighting Colour | RGB |
| Internal Dimensions | |
| Max. CPU Cooler Height | 180 mm |
| Max. GPU Length | 380 mm |
| Max. PSU Length / Depth | 200 mm |
| Dimensions | |
| Length / Depth | 460 mm |
| Width | 231 mm |
| Height | 485 mm |
| Weight | 9.16 kg |
| Case Features | |
| I/O position | Top |
| Side panel | closed |
| Front door | No |
| Cable Management | Yes |
| Filters included | Yes |
| Noise dampening | No |
| Mainboard slide / tray | Yes |
| Remote included | No |
| Transport system | No |
| Display | |
| Display Included | No |
| Features | |
| Housing feedthrough | No |
| Motherboard Support | |
| Compatible motherboard formats | E-ATX, ATX, Micro-ATX, Mini-ITX |
| Max. Motherboard Format | E-ATX |
| Radiator Support | |
| Max. Radiator Compatibility | 1x Triple (420 mm) |
| External Ports | |
| USB 3.2 (external) Type C | 1 |
| USB 3.1 (external) Type C | 1 |
| USB 3.0 (external) Type A | 2 |
| USB 2.0 (external) Type A | 1 |
| Audio outputs & inputs | 1x output + 1x input (3.5 mm jack, 3-pin, TRS) |
| Card reader | No |
| Fan Support | |
| 120 mm fans | 7 |
| 140 mm fans | 6 |
This case has absolutely fantastic airflow, is sturdy and actually very aesthetically pleasing with gromets for ease of cable management. Used this case for my B650E-E, 7800X3D, RX6950XT and even had enough room to fit my mammoth of a cooler the Noctua NH-D15 and still close the glass panel. Would definitely purchase again.
I've chosen this case for my build because it has all the necessary connections on top of the case so it can be accessible. It is also large so it can be future-proof if I need to upgrade for a bigger GPU. It has plenty of ventilation and fans to keep the PC cool. The glass panel is an extra bonus so I can admire the beautiful components.
Keep me up to date with the latest news, product launches and promotions
* Required field
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.
