This product is no longer available.
The Modular Power PSUs from Kolink boast an improved circuit design and an associated performance increase. These features offer a significant enhancement of voltage regulation and meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Modular Power the quietest power supply of its kind. The Modular Power PSUs looks amazing in any high-end gaming system due to its modern design and the flexible and flat cables use for connections across the system.
The 850 Watt model of the Modular Power series offered here has enough connections and performance for fast gaming PCs with basic equipment. The PSU delivers up to 840W and 70A on the +12V rail while providing 130W and 20A each on the +3.3V and +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU and exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSU's highly efficient circuit design features independent DC-to-DC converters for the 3.3V and 5V outputs, ensuring extremely precise voltage regulation.
Each example of Modular-Power series is cooled by a 120mm fan with durable and quiet hydraulic sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan and thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Modular Power has a 4+4 pin connector for the CPU and four 6+2 pin connectors for dedicated graphics cards. Eight SATA and four Molex connectors are available for additional components. The flat, flexible and completely black cables have a modern look and fit into almost any up-to-date gaming setup.
Note:
For environmental reasons the manufacturer does not supply a power cord for connection to the mains.| Dimensions | 150mm x 86mm x 160mm W x H x D |
| Fan | 120mm Automatic control |
| Colour | Black Power supply and fan |
| Efficiency | Minimum 85/82/82% at 50/20/100% load. Fulfils requirements for 80 PLUS Bronze certification. |
| Active PFC | Yes |
| Form Factor | ATX12V 2.4 / EPS12V 2.92 |
| Performance | 850W +3,3V: 20A +5V: 20A +3,3V & +5V combined: 130W +12V: 840W / 70A -12V: 3.6W / 0,3A +5Vsb: 12.5W / 2.5A |
| Connectors | Semi-modular connections Motherboard: 1 x 20+4-Pin ATX12V/EPS12V (600mm, fixed) CPU: 1 x 4+4-Pin ATX12V/EPS12V (600mm, fixed) 1 x 2 6+2-Pin PCIe (500 + 150mm, fixed) 1 x 2 6+2-Pin PCIe (500 + 150mm, modular) 3 x 2 SATA + 1 x Molex (450 + 150 + 150mm, modular) 1 x 2 SATA + 1 x Molex + 1 x S4P (450 + 150 + 150 +150mm, modular) |
| Protective Circuits | OVP/UVP (Over- and undervoltage protection) SCP (short circuit) OPP (overload) OCP (overcurrent on rails +12, +3.3 and +5 Volt) |
| MTBF | 100,000 hours |
| Manufacturer's Guarantee | 3 Years |
| Dimensions | 150mm x 86mm x 160mm W x H x D |
| Fan | 120mm Automatic control |
| Colour | Black Power supply and fan |
| Efficiency | Minimum 85/82/82% at 50/20/100% load. Fulfils requirements for 80 PLUS Bronze certification. |
| Active PFC | Yes |
| Form Factor | ATX12V 2.4 / EPS12V 2.92 |
| Performance | 850W +3,3V: 20A +5V: 20A +3,3V & +5V combined: 130W +12V: 840W / 70A -12V: 3.6W / 0,3A +5Vsb: 12.5W / 2.5A |
| Connectors | Semi-modular connections Motherboard: 1 x 20+4-Pin ATX12V/EPS12V (600mm, fixed) CPU: 1 x 4+4-Pin ATX12V/EPS12V (600mm, fixed) 1 x 2 6+2-Pin PCIe (500 + 150mm, fixed) 1 x 2 6+2-Pin PCIe (500 + 150mm, modular) 3 x 2 SATA + 1 x Molex (450 + 150 + 150mm, modular) 1 x 2 SATA + 1 x Molex + 1 x S4P (450 + 150 + 150 +150mm, modular) |
| Protective Circuits | OVP/UVP (Over- and undervoltage protection) SCP (short circuit) OPP (overload) OCP (overcurrent on rails +12, +3.3 and +5 Volt) |
| MTBF | 100,000 hours |
| Manufacturer's Guarantee | 3 Years |
Nice and quiet when running and easy to fit. Pretty cheap for a modular 850 bronze supply but I'd like to have seen the extra 4 pin cable to the additional CPU Mobo connection (although - it's not a requirement for boards with this connection) and the modular cables aren't very varied. Every one of the cables with a sata power have 2x sata, plus a molex. I'd have prefered to see a single cable with multiple sata connections. Who uses molex these days???
Keep me up to date with the latest news, product launches and promotions
* Required field
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.
