The Phanteks Glacier One 360 MP is a premium quality all-in-one (AiO) liquid cooler. It features three powerful 120mm fans with high static pressure. There is also a PWM-controlled pump to provide users with the sufficient cooling for an advanced modern system. Its aesthetics are equally impressive with easy to configure digitally addressable RGB lighting and an eye-catching mirror with an infinity effect.
The Phanteks Glacier One 360 MP AiO Liquid Cooler at a Glance: Black all-in-one liquid cooler
- 360mm aluminium radiator
- High-performance pump with PWM control for quiet operations
- Three120mm PWM fans with high static pressure
- Pump cover with D-RGB lighting and infinity mirror
- Easy installation and high compatibility
The Phanteks Glacier One 360 MP AiO Liquid Cooler in detail:
The Phanteks Glacier One 360 MP has a 360m dual radiator and is constructed from aluminium with a fin density of 21 FPI. This provides a large surface area for cooling while retaining a compact form factor.
PWM controls provide adjustable cooling and guarantee high-performance. In general, the pump reaches speeds of up to 2,800rpm but it can run at 3600rpm once coolant reaches temperatures exceeding 60°C. An Intelligent protection mechanism automatically responds to high temperatures and adjusts the pump's speed accordingly. These combined features ensure your PC hardware will run safely and at its optimum.
The three 120 mm fans feature large fan blades that achieve a high static pressure and can pass up to 102.80 m/h (60.50 cfm). A daisy-chain cable design prevents cables from getting tangled up.
In addition to a compact design, the Phanteks Glacier One 360 MP has angled fittings to enable high compatibility with motherboards, memory modules and other components.
High Performance and an elegant design
The radiator-pump combination is undoubtedly the AiO cooler's visual highlight. It is equipped with RGB lighting and an infinity mirror. As well as a total of 14 digitally addressable RGB LEDs. Illumination effects can be controlled via Phanteks RGB controller or software.
The flexible tubes are sleeved and contribute to a stylish design. With the included tube clips, the tubes can be easily positioned. The Glacier One 240 MP is already prefilled and pre-applied with heat conductive paste on the CPU contact surface.
A cover can be magnetically attached to the pump housing after mounting. This results in a stylish and clean look.
Specification:
- Weight:
1.47kg- Colour:
Black- Radiator:
Measurements: 294 x 120 x 27mm (L x W x H)
Material: Aluminium
FPI: 21 - Pump:
Measurements: 93 x 41 x 92mm (W x H x D)
Material: Copper, Plastic
Speed: max. 2800 rpm +/- 300 at 100 % (PWM controlled), 3600rpm when coolant over 60 °C
Bearing: Ceramic
Noise: max. 27 dB(A)
Length of cable: 245mm
Power: 2 V, 0.3 A, 3.6 W
MTTF: 50,000 hours - Pump Top:
Material: Plastic, Tempered Glass
RGB lighting: 3-pin D-RGB LED (5V, Data, Ground)
Number: 14 LEDs
Power: 5 V, 0.42 A, 2.1 W
Length of RGB cable: 550mm + 75mm daisy chain - Tubes:
Lenght: 400mm (sleeved)
Diameter: 11mm
Material: EPDM
Special features: 3 Clips enclosed, rotatable Fittings - Fans:
Type: 3x 120mm (120 MP PWM)
Measurements: 120 x 120 x 25mm (W x H x D)
Speed: 500 - 2,200 rpm +/- 10 %
Airflow: 23.44 - 102.80 m/h (13.79 - 60.50 cfm)
Static pressure: 0.17- 3.41 mm H2O
Bearing: UFB (Updraft Floating Balance)
Noise: 18 - 34.2 dB(A)
Connector: 4-pin PWM
Length of cable: 130mm daisy chain + 500mm extension
Power: 12 V, 0.15 A, 1.8 W
MTTF: 150,000 hours - Compatibility:
Intel: 1700, 115x, 1200, 1366, 2011(-V3), 2066
AMD: AM4, sTRX4, TR4 (mounting mechanism not included) - Warranty:
6 years
