Very Good Case
by HanfordPCIt's a very good case for the money with a few points worth consideration.It fits an ATX motherboard into a very small case with minimal fuss. The build really is quite painless. Instructions included are good and clear. The Aluminium chassis oozes quality and looks really good. The build is a lot more simple than some more expensive and more spacious cases i've used.A few points to consider for both the builder and the manufacturer.The power button can be accidentally turned off with your knee! Not good! Please make it more recessed for future revisions/designs.AIO Coolers. The manufacturers state you can fit a 270mm Graphics card. If you fit a Radiator in the top of the case then you might need a slightly smaller card OR a slightly smaller PSU. I have a 240mm rad (37mm deep plus fans), a GPU card that is 270mm and a PSU that is 165mm deep (and modular!) and the pipes of the rad foul on the GPU and PSU. To this end i've personally reinvested in a new heatsink and fan, to make the build work as this was the cheapest solution.Please bear in mind the depth of the radiator. Mine is quite old and many new rad's are much shallower than the 37mm deep Rad that I own. Much newer rad's with depths of 27mm might be ok. Please check.I don't want this to detract from the case as it really is quality and quite rare to fit an ATX build into a case that is so small. The negatives are far outweighed by the positives.
